Website: www.intoxyc8me.live
Copyright intoxyc8me.live. You are welcome to use this material if you credit us and link back to our

website.

Heart Key Fob
Materials:
6 feet of 425 paracord
Heart shaped split ring
Round split ring
Beads optional
{Cost for this project starts at $3.50}

Step 1: Fold your paracord in half. Insert
the center of the cord down through the

heart split ring.
Step 2: Insert both sides of the cord down
through the loop in the center of the cord
and pull tight. Position at the bottom left

side of the heart ring.

If you are using beads, thread one on the
right cord now.

Step 3: With the right cord, insert the end
down through the heart and bring it up
through the loop it created. Pull tight.

Cross the working ends with A over B.

Step 4: Bring the same end up through
the heart and down through the loop it

created. Pull tight.
Repeat steps 3 and 4 with the left cord.
Continue the process until the heart is

covered adding beads as desired.

With the working ends at the top of the
heart, insert them through the round split

ring and position to desired length.
Bring the working ends down through the

center of the cords as shown.

Step 5: Bring A over the left cord and
under the right cord. Pull tight and push A

up toward the split ring.

Step 6: Bring B over the right cord and
under the left cord. Pull tight and push B

up toward the split ring.
It should look like this. Continue repeating

steps 5 and 6 alternating left and right
sides. Keep everything tight as you work.

Use a lacing needle to insert the cord as
the space gets smaller. Once you reach

the end, trim and melt the ends.